Panasonic PS-700 Satellite Receiver
This receiver features built-in quad amp with 4 speaker outputs, auto peak adjustments, 28 satellite memory, 18 video and 9 audio programmable favorite channels, programmable built in TI filter, on-screen menus with satellite graphics and UHF remote. It also features programmable parental lock, skip scan tuning, dual LNB inputs switchable for V/H or C/Ku last channel recall and programmable AFC on/off. LEGEND Blue = Buttons on Remote or Receiver HOW TO PROGRAM A satellite 2. Press PRG and a menu will be displayed. (See below). ------------------------------------------ 1. PARENTAL LOCK (on/off) ------------------------------------------ 3. Press 6 for SET UP. If it asks for a password enter 5-1-7-2 then press ENTER. 4. The picture that you had to begin with should be back on the screen and the word "SET UP" will be in the top left corner. The name of the satellite, channel and other information will be on the screen as well. 5. Press SAT and then the new satellite name and satellite number. One of three things will happen now. Verify that it is still on the correct channel.
6. Press EAST or WEST to move to the new satellite location. Stop when a picture or black screen comes in. If it is the correct picture then proceed to step 7. If not, then continue moving until it is found. 7. Verify the correct satellite name is still at the top of screen.
8. If it seems to be stored and the picture is in, then press PRG and press 1 for SET UP END. 9. This should complete the process.
How to reverse the format (change polarity) 1. Press PRG. 2. Press 5 for Now Satellite Format H (V). 3. Press 1 for (V) or number 2 for (H) to change the format. 4. It should return back to the picture. If the menu is still on the screen, then press ENTER and return to step 6.
ERROR-2: Satellite already stored, press enter to override. ERROR-3: Satellite already stored in current position, press enter to override ERROR-8: Error-2 & Error-3 occurred simultaneously. Tap EAST or WEST once and then press ENTER again. ERROR-!: Memory Error. Turn power off & call dealer. |
|
|
We have designed this site with both our current and prospective customers in mind. If you have any bugs, broken links to report, comments, questions or suggestions about Orbit or this web site, please feel free to send a message to webmaster.