||Standard Multi-Sat Professional Installation. This installation is for one Multi-Satellite Dish, one wire run and one receiver purchases.
Mount dish on an outside wall of the dwelling with appropriate hardware, within 100 feet cable length of TV.
Provide a single wire run of up to 100 feet of RG-6 cable.
Provide the hardware necessary to ground the satellite antenna.
Route all cables to the TV either through an exterior wall (frame or one layer of masonry) or from a basement.
Connect the receiver to an existing telephone jack (if available) in the same room with the supplied telephone wire.
Educate the consumer on system use and contact programmers for activation.