This receiver is like a Drake 924. It has an
Alpha, NUM, Memory (hold until it blinks), Format, Cancel, Skew +/-, AUTO
(turns auto light on/off).
LEGEND
Blue = Buttons on Remote or Receiver
HOW TO PROGRAM A SATELLITE
1. You can start from any satellite. The satellite does not have to be
erased.
2. Press auto
and turn the Auto Light off.
3. Press the left
or right arrow
on the receiver until a picture is found. You cannot use left/right
on the remote.
4. Press FORMAT
to reverse the polarity if necessary.
5. To store the satellite: Press ALPHA
and then NUM
until desired satellite is up.
6. Press and hold MEMORY
until the name blinks.
7. Press auto
and turn the Auto Light on.
|